Top 8 des meilleurs pieds de microphone Blue Yeti que vous devriez acheter en 2022 Review
L'augmentation de la puissance de calcul a apporté de nouvelles opportunités, à la fois personnelles et professionnelles. Mais il manquait une chose importante. La possibilité de pouvoir brancher un micro directement sur un ordinateur portable ou un ordinateur sans utiliser d'interface. Cependant, la création du microphone USB a résolu ce problème.
Ce sont des appareils plug-and-play, et donc très faciles à utiliser. De même, ils sont pratiques et ouvrent un tout nouveau monde pour les interviews, les podcasts, etc.
Avancées technologiques
Il ne fait aucun doute qu'ils constituent une avancée passionnante pour certains environnements. Mais ils ne sont certainement pas pour tout le monde ni pour tous les usages. Cependant, ils ont beaucoup à offrir dans certaines situations, en particulier pour ceux qui souhaitent une option plug-and-play.
Mais, il est juste de dire qu'ils n'ont pas fait grande impression sur le haut de gamme du marché. Il est peu probable que vous les trouviez dans les studios d'enregistrement. La qualité a quelque chose à voir avec cela, bien sûr. Le temps nous dira si les entreprises produisent jamais des micros USB pour rivaliser avec les micros Neumann, Sennheiser ou AKG pour le chant.
Le yéti bleu
L'un des meilleurs micros USB disponibles est le Blue Yeti. Fabriqués par Blue, ils sont l'une des nombreuses options USB produites par la société. C'est aussi l'un des plus populaires. Pour enregistrer des voix off, des podcasts et des interviews, il fait un très bon travail.
Il n'y a rien à redire sur sa construction. C'est un micro bien fait et assez robuste et stable. C'est élégant et ça a l'air bien. Cependant, s'il a un point faible, c'est bien le stand.
Le stand lui-même est également assez stable et, dans certains cas, un atout. Mais cela peut avoir un effet négatif sur l'enregistrement. Dans cet esprit, j'ai préparé cette revue des meilleurs supports de microphone Blue Yeti actuellement sur le marché.
Un stand alternatif ?
Beaucoup de gens semblent convenir qu'il est préférable d'utiliser un autre pied de micro que celui fourni. Je voudrais quand même faire cette observation.
Le filetage sur le Blue Yeti pour le montage est de ⅝ ; par conséquent, vous devrez trouver un support avec ce fil. Alternativement, un support qui a un adaptateur. Sur cette base, examinons les meilleurs supports pour votre microphone Blue Yeti .
Top 8 des meilleurs supports de microphone Blue Yeti pour tous les budgets en 2022
- Bras de microphone de studio à montage pivotant RODE PSA 1 – Le pied de microphone Blue Yeti le plus durable
- Support de bras de microphone InnoGear – Le sable de microphone Blue Yeti le plus réglable
- DISINO Microphone Boom Arm Stand Heavy Duty Spring Mic Stand - Meilleur support de microphone Blue Yeti Heavy Duty
- Support de microphone Iksee Studio Arm - Meilleur support de microphone Blue Yeti de base
- Perche de suspension de microphone réglable East Shining – Meilleur support de microphone Blue Yeti à petit budget
- Pied de microphone à base lestée courte Gator Frameworks - Meilleur rapport qualité-prix Support de microphone Blue Yeti
- Heil Sound PL-2T Overhead Broadcast Boom – Meilleur pied de microphone Blue Yeti équilibré
- Blue Compass Premium Tube-Style Broadcast Boom Arm – Meilleur pied de microphone Blue Yeti Boom Arm
1 Bras de microphone de studio à montage pivotant RODE PSA 1 – Le pied de microphone Blue Yeti le plus durable
Il s'agit d'un pied de micro de la société australienne Rode. Ils sont bien connus pour fabriquer des micros et des accessoires de qualité. Mais tout aussi important, ils fabriquent des produits robustes et robustes. Un facteur important pour un pied de micro. Le PSA1 est l'un des supports de microphone les plus populaires pour Blue Yeti utilisateurs.
La construction
Il est robuste et bien construit avec une conception entièrement métallique. Le Blue Yeti pèse un peu plus d'une livre et ce support peut supporter jusqu'à deux livres et demie. C'est plus que suffisant pour le micro, le filtre anti-pop et un support antichoc.
Il a été conçu pour supporter le poids du micro le plus lourd. Il est fourni avec un adaptateur pour convertir la taille du filetage de ⅜ à ⅝ afin que le raccord soit compatible. Cela en fait l'un des pieds de microphone Blue Yeti les plus compatibles autour.
Options de montage
Il existe deux options de montage, la pince de bureau et l'installation de l'insert de bureau. Le support de bureau vous permettra de le fixer sur des ordinateurs de bureau d'une épaisseur allant jusqu'à 55 mm. Cependant, l'insert de bureau vous offre un peu plus à 70 mm d'épaisseur. Le support a une conception à deux axes. Celui-ci est doté d'un pivot et facilite la fixation et le positionnement du support dans un endroit pratique.
Une bonne portée
Il vous permettra beaucoup de distance dans sa portée. Jusqu'à 33 pouces de haut et 32 pouces horizontalement. Et il restera stable avec un micro attaché à ces extrêmes. Il est flexible et tournera à 360 degrés. Des enrouleurs de câble Velcro sont inclus pour que vous puissiez garder le câble de votre microphone en sécurité et à l'écart.
Changements de poste
Pour changer la position du bras de flèche, il est conçu avec un mécanisme à ressort robuste. Cela le rend sûr si vous changez la position du bras, et il restera là où vous le souhaitez. Il ne sera pas affecté par le poids du micro.
Un bon support de micro fabriqué à partir de bons matériaux et qui devrait être considéré comme l'un des meilleurs supports de microphone Blue Yeti.
Avantages
- Bien fait avec de bons matériaux.
- Bonne portée et capacité de maintien de poids.
Inconvénients
- Les câbles n'ont pas de canal pour la fixation à l'aide d'attaches Velcro.
2 Support de bras de microphone InnoGear – Le sable de microphone Blue Yeti le plus réglable
InnoGear est une entreprise qui vend une grande variété de produits. Vous ne pouvez donc pas les qualifier de « spécialistes du pied de micro ». I am not sure where this mic stand comes from or who designed and built it, from their website that seems to be a closely guarded secret. Having said that, it is a decent product and worth including.
Specially designed for Blue mics
This is a mic stand that will operate with many of the Blue USB range. Including the Snowball, the Yeti, and the Yeti Nano. It has a very stable build being an all-metal construction with steel tubed arms that are half an inch thick. That gives it a high load-bearing capacity of up to four and a half pounds.
There is a spring-balanced system built-in to give you plenty of secure movement for getting the right position. The cabling is hidden inside the arm and not exposed to view. It is supplied with an ⅝-inch thread connector for fitting the mic.
The Boom Arm
Good adjustments and reach. Horizontally it will give you up to thirty-eight inches. And vertically up to thirty-three and a half inches. The arms will support the weight of a Blue Yeti mic when at full reach. The boom arm is foldable for storage when not in use. There is a swivel action for adjusting the mic position. But there is no locking facility to keep it in a set position.
The Clamps
There are two mounting options. There is a typical desk clamp as well as a desk-insert attachment. Unclipping the mic from your desk is easy. It will attach to all desks that have a lip of over two inches. All this adds up to it being one of the best desk mounted BlueYeti microphone stands vous pouvez acheter.
Avantages
- Good quality all-metal build.
- Plenty of adjustment options at a cost-effective price.
Inconvénients
- The swivel on the boom arm doesn’t lock.
3 DISINO Microphone Boom Arm Stand Heavy Duty Spring Mic Stand – Best Heavy Duty Blue Yeti Microphone Stand
This is a mic stand with a very heavy-duty look about it. I wouldn’t say it was the most visually appealing in some parts of its design, but it certainly does the job.
La construction
It is built with a steel tube frame with springs enclosed internally, which gives it a nice stylish look. It is strong and is not going to bend easily. Although you should ensure that all tightening controls are loosened before adjusting them.
Whilst the design of the boom arms is attractive; the clamp is a different thing altogether. It has a “vintage” woodworking G-clamp look, with what seems like an antiquated locking control.
The look seems to contradict the rather stylish steel tubes above it. Nevertheless, it does its job and offers a secure fit. The scissor arm design is fully adjustable and is sprayed using an electrostatic powder. This helps to make it anti-rust.
The Load
It can hold an impressive five pounds in weight. As a result, it’s one of the strongest Blue Yeti microphone stands you can buy. It is fitted with a standard ⅝” thread, so there is no need for an adapter. Two scissor tube arms will extend to about twenty-eight inches. These can be folded away after use.
The Mount
It has clamps that will fit desks up to three inches in depth. The clamp itself has rubber fittings to ensure it doesn’t scratch the desk. The fitting allows the boom arm to be swiveled if necessary. The movement when clamped to the desk is smooth and stable.
A Budget option
Although the price point intimates that this is a budget range product, it is well-made and very secure. It may not have the length and reach of some stands, but it is one of the most secure Blue Yeti microphone stands disponible.
Avantages
- Well-made with good materials at an attractive price point.
- Safe and secure fit holding up to five pounds in weight.
Inconvénients
- Some may need a longer reach.
4 Iksee Studio Arm Microphone Stand – Best Basic Blue Yeti Microphone Stand
This is a basic mic stand with a boom arm that will work with various microphone models. It is a little limited in that it will only operate with microphones that weigh up to 2.86 pounds. That will rule out some but includes the Blue Yeti. On the other hand, it does make this one of the best lightweight Blue Yeti microphone stands disponible.
La construction
This stand has quite a sturdy all-metal build with its steel frame and iron base. It has a simple design with an internal spring. This allows some adjustments to the position of the mic, either up or down. It also has a 360-degree rotation. The arm is adjustable, so it can be folded away after use. It has a decent amount of reach while retaining its balance.
The Clamp
It can accommodate desktops that are up to 2.2 inches in depth. It is easy to adjust, but in my view, it doesn’t have the most secure fitting. The base plate of the clamp is quite small, and the knob for tightening the clamp is very basic.
It certainly appears that you might struggle to get a decent amount of pressure to hold a mic in some positions. It does take a reasonable weight of mic for this stand to function correctly. If the mic is very light, it does not apply enough weight for operation.
Some extras
You are supplied with a threaded screw for connecting the Blue Yeti and two foam covers for the mics.
Avantages
- Basic boom arm stand with an all-metal build.
- Adjustable arm with 360-degree rotation.
Inconvénients
- The clamp is a little vulnerable.
5 East Shining Adjustable Microphone Suspension Boom – Best Budget Blue Yeti Microphone Stand
If you are looking for a budget boom stand for your Blue Yeti, then this from East Shining might be an option.
La construction
This might not be the most aesthetically pleasing stand you will find, but it certainly does the job. It has dual suspension springs placed on each of the boom arms. These act to protect the mic from any unwanted movements or shaking but also increases the mic’s stability. It can support loads of up to four and a half pounds, so it will cope easily with the Blue Yeti.
It is made from Zinc Alloy and has a steel frame. Therefore, the build is strong and sturdy. It has been given an electrostatic powder-sprayed finish. This makes it anti-rust and will ensure it stays in decent condition. The boom arms are lightweight and fully adjustable and can be folded away easily after use.
The Clamp
It has a simple table mounting clamp with a screw tightener. It is easily fitted to a tabletop that has a depth of up to 2.15 inches. The clamp has a lining of a soft sponge material where it makes contact with the table. This is just to protect it from possible scratching. For added protection, there is also a rubber washer.
The Reach
With the two legs combined, it can reach up to twenty-seven and a half inches. It will therefore be able to fit easily into most environments and allow you to get mic angles correct. It comes with an instruction booklet, a plastic clip mic holder, and a ⅝” brass adapter to fit the thread of the Yeti.
A word of caution
You do need to be careful when opening the package this stand will be delivered in. The arms are held together with a simple band. When it is broken, the arms will spring out very forcibly. Best not to have your fingers inside the package when they do.
Avantages
- Quite well-built beats basic stand with a decent reach.
- Cost-effective option.
Inconvénients
- Some will need a stand with a bit more visual style.
6 Gator Frameworks Short Weighted Base Microphone Stand – Best Value for the Money Blue Yeti Microphone Stand
Now we move away from the boom arm design to a short stand with a compact base. This has a maximum height of just 23 inches, with a boom arm measuring 16 inches.
La construction
The base is quite compact at 4.5″ by 8″ and is made of heavy-duty steel. This will provide it with stability and good balance, so it will not get knocked over easily. Because of its low stature, it offers up the potential for other uses than as a desk mic stand. We will look at that later.
To prevent any rumbling noise that may occur between the base and the desk, it has a non-slip vibration gasket. Another plus point is the integrated cable management. Thus keeping unwanted cables out of the way.
Compact arm extension
For adjusting the position of the short arm, there are some soft rubber knobs. This makes them easier to grip and turn. That feature is not often included but is a nice touch. It takes just a quarter turn to be able to make those adjustments.
At its full extension, the stand is balanced and stable. And even though the Yeti weighs just over one pound, the stand will not topple over. Some people prefer single-section boom arms as they are easier to adjust. That certainly is the case with this stand.
What other uses?
I mentioned earlier that it might have other uses. It occurs to me that this is a good stand for placing on a desk and using your mic with your computer. But it also has other possibilities.
How about a mic in a home or small recording studio for placing in front of a kick drum? Or for micing up an amp? It is stable and holds a decent weight, and is a good height. As a result, this is one of the most versatile Blue Yeti microphone stands sur le marché.
Set at a very attractive price point, this has to be considered as one of the best Best Blue Yeti Microphone Stands.
Avantages
- Well-built stable mic stand at a great price point.
- Offers a variety of uses.
Inconvénients
- Some will prefer a full-size boom.
7 Heil Sound PL-2T Overhead Broadcast Boom – Best Balanced Blue Yeti Microphone Stand
Back to the boom design for this stand from Heil Sound. They are a company based in Illinois and were established in 1966 by Bob Heil. They also manufacture microphones and other accessories, so they ought to know what makes a good stand.
Well laid-out design
They have gone for a simple, uncluttered, but functional design. One of the features is that any cabling for the mic is hidden away. This puts it out of sight, of course, but also prevents any unfortunate accidents. They also make sure the springs are all hidden away internally. That is a feature that many prefer.
La construction
A strong all-metal build ensures it is stable, and the springs we have mentioned offer a perfect balance. The design features removable plates on the top and the back. This allows you to thread through the mic cable.
It can handle a weight load of up to three and a half pounds. Holding the Blue Yeti stable and in a fixed position is not then a problem. It will take a ⅝” thread.
The Clamp
There is a standard C-clamp mounting system, which may be considered its weak point. The clamp is not part of the stand itself and is included as an extra. And while the stand will hold the mic securely, it is only as secure as the connection to the table or surface.
The clamp will attach the stand to a table, but it does not feel as secure as some. Furthermore, the clamp has no padding, so it could scratch any surface to which it is attached. You can insert your own padding, but then the clamp tends to move around on the surface.
Not the cheapest around, and we remain unconvinced about the fitting. The boom arm is nicely designed and works well. The same cannot be said for the clamp.
Avantages
- Nicely designed with good materials.
- Cabling and spring systems are hidden away out of sight.
Inconvénients
- The clamping system is inefficient and can mark your desk.
8 Blue Compass Premium Tube-Style Broadcast Boom Arm – Best Blue Yeti Boom Arm Microphone Stand
Who should know what is required to make a great stand for the Yeti? You would think it would be the company that made it. This is Blue’s first attempt at a mic stand.
La construction
It features a strong and stable tube-style design made from aluminum. This allows the springs and the cabling to be kept safely out of the way and out of sight. Cable management is important with mics that are used in enclosed spaces. It is easy to trip over a cable and send the mic crashing to the floor.
Needless to say, it is designed to hold the weight of the Yeti. It will hold any mic up to 2.4 pounds in weight.
Further design features
It allows you to complete a 360-degree rotation and a fully adjustable boom. You can therefore get the positioning exactly how you want it.
The friction hinges tighten by hand and give you a quiet and smooth operation. It is compatible with all the standard shock mount fittings.
Clamping
They have used a C-clamp system. Once again, if there is a weak point, it is the clamping system. It is a little bit insecure and could damage the surface you attach it to.
This stand comes with a twenty-foot XLR cable and a pop filter. Both are more than useful additions. Furthermore, it is one of the most affordable Blue Yeti microphone stands sur le marché.
Avantages
- Good build quality with plenty of adjustments and 360-degree rotation.
- Cabling and Springs are hidden in the arms.
Inconvénients
- Clamping is not as secure as it might be.
Best Blue Yeti Microphone Stands Buying Guide
Although often overlooked, the stand is an important piece of equipment for a microphone. An inefficient stand can have several effects that are not what you need when trying to get a decent recording.
Everyone’s requirements will differ slightly. So, the first thing you need to do is decide what sort of stand you need. There are a couple of options.
Stability
The stand must be stable to be able to hold the mic. That means not only supporting its weight but also having good adjustments. You will need to be able to get the mic in exactly the right place.
What sort of stand?
Do you want a boom arm stand that will give you plenty of room? Or do you prefer a desk-mounted stand? The boom will give you the reach and the room, but it can have its stability problems. A desktop mic might incur the same problems that the Yeti has with its built-in stand.
Before you buy
After deciding, but before you buy, you need to make sure there’s enough of an overhang from the edge of the desk. If there is none, most boom arm mics cannot be attached.
Budget
None of the stands we have looked at are particularly expensive. You will be able to get a good stand for a reasonable investment.
Looking for a Great Microphone or Mic Accessories?
Nous pouvons vous aider avec cela. Check out our in-depth reviews of the Best Microphone Stands, the Best Live Vocal Mics, the Best Interview Microphones, the Best Computer Microphones, the Best Cheap Microphone Under $50, the Best Microphones For YouTube, the Best USB Microphones you can buy in 2022.
And if you are after more awesome Blue microphone products, have a look at our comprehensive Blue Snowball USB Microphone Review, our Blue Yeti X Review, our Blue Snowball iCE Review, our Blue Yeti USB Mic Review, and our Blue Baby Bottle Review for more amazing items currently on the market.
What are the Best Blue Yeti Microphone Stands?
Not being a great fan of boom arm stands, I would go for a stable short weighted base stand. I would choose the…
Gator Frameworks Short Weighted Base Microphone Stand
Well-made, safe and secure, it is solid enough to do what I need. But it also has plenty of potential for use in other recording applications. My choice for the Best Blue Yeti Microphone Stand.
Jusqu'à la prochaine fois, laissez-vous entendre.